Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F710-60-B4-H

700 Series C-Face Quilled Reducer
Item #101853589
  • 1" Center Distance
  • 60:1 Ratio
  • 42CZ Frame
  • C-Face Quilled Input
  • Left & Right Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 1" Center Distance
  • 60:1 Ratio
  • 42CZ Frame
  • C-Face Quilled Input
  • Left & Right Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Super finished oil seal diameters on both input and output shafts extend seal life
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • High strength steel output shaft ensures capacity for high torque

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Output RPM @ 1750 rpm Input 29.2 rpm
Max. Overhung Load @ 1750 rpm 150 lb/in
Bolt Center 2 5/8" x 1 11/16"
Base to Centerline of Output Shaft 1.31 in
Output RPM @ Input RPM 29 rpm @ 1750 rpm
Housing Material Cast Iron
Input HP @ RPM 0.065 hp @ 1150 rpm, 0.12 hp @ 1750 rpm
Washdown Duty No
Max. Thrust Load @ 1150 rpm 200 lb/in
Bolt Centers w/ Vertical Base Kits (in) 5.13 x 2.31
Torque Out @ 1150 rpm 105 in lb
Lubrication None
Torque Out @ 1750 rpm 144 in lb
Output Torque @ RPM 105 in lb @ 1150 rpm, 144 in lb @ 1750 rpm
HP @ RPM 0.08333333 hp @ 1800 rpm
Frame 42CZ
Input (Shaft or Bore) Size 1/2 in
Output (Shaft or Bore) Size 5/8 in
Use With 710
Base to Shaft Center Height w/Std. Base Kit 2 3/4 in
Base to Shaft Center Height w/High Vert. Base Kit 2.94 in
Reduction Type Single Reduction
Input Configuration C-Face Quilled
Base No
Thermal Input Horsepower @ 1750 RPM N/A
Worm Position Universal
Max. Input HP @ 100 rpm 0.008 hp
Motor Application General Purpose
Fan Cooled No
Box Height 3 5/8 in
Family Name F
Output Configuration Left & Right Output
Box Length 4 1/4 in
Base to Centerline of Input Shaft 2 5/16 in
Bore Code B4
Max. Overhung Load @ RPM 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm
Ratio 60:1
Max. Thrust Load @ RPM 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm
Bolt Center Length x Bolt Center Width 2 5/8 in x 1 11/16 in
Bolt Centers w/ Std. Base Kit (in) 3 3/4 x 2 7/8
Frame Size 42CZ
Box Width 3 11/32 in
Shaft Assembly Code H
Center Distance 1 in
Weight 10.1 LB
EAN or UPC 781711439432
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison