Find a Service Center
Boston Gear
F7718-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848244
- 1 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Input Motor HP | 1 |
| Shaft Assembly Code | H |
| Media Mapping Output | H |
| Motor Application | General Purpose |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Use With | 718 |
| Housing Material | Cast Iron |
| Torque Out @ 1750 rpm | 552 in lb |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Box Width | 5 1/32 in |
| Rated Efficiency | 90% |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Keyway Size | 3/16 x 3/32 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Frame | 56C |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Material | Cast Iron, Standard Paint |
| Frame Size | 56C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Output Speed | 116.7 rpm |
| Bore Code | B5 |
| Base | No |
| Motor HP | 1 hp |
| Standard | AGMA Service Class I |
| Washdown Duty | No |
| Output Configuration | Left & Right Output |
| Family Name | F |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Torque | 552 lb-in |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Output (Shaft or Bore) Size | 7/8 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Input (Shaft or Bore) Size | 5/8 in |
| Fan Cooled | No |
| Box Height | 5 3/4 in |
| Reduction Type | Single |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Series | 700 |
| Box Length | 5 1/2 in |
| Motor Frame Size | B556C |
| Lubrication | None |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Output Shaft | Solid |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Input Configuration | C-Face Quilled |
| Torque Out @ 1150 rpm | 472 in lb |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Torque @ RPM | 472 in lb @ 1150 rpm, 552 in lb @ 1750 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Worm Position | Universal |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Input Power Rating | 1.13 hp, 0.843 kW |
| Center Distance | 1.75 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Output Bore Shaft Dia. | 0.875 in |
| Ratio | 15:1 |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Style | Right Angle |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Media Mapping Style | F |
| Center Distance Code | 718 |
| Input HP @ RPM | 0.67 hp @ 1150 rpm, 1.13 hp @ 1750 rpm |
| Weight | 19.1 LB |
| EAN or UPC | 781711519318 |
