Find a Service Center
Boston Gear
F7724-25-B7-G
700 Series 25:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101853365
- 1.50 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Base Mounting Attachment | No Base |
| Style | Right Angle |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Standard | AGMA Service Class I |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Output Shaft Projection | Solid Left Output |
| Frame | 140TC, 180C |
| Use With | 724 |
| Input HP @ RPM | 1.03 hp @ 1150 rpm, 1.55 hp @ 1750 rpm |
| Washdown Duty | No |
| Lubrication | None |
| Torque Out @ 1150 rpm | 1150 in lb |
| Center Distance Code | 724 |
| Reduction Type | Single |
| Motor HP | 1 1/2 hp |
| Keyway Size | 3/16 x 3/32 |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Output Speed | 70 rpm |
| Bore Code | B7 |
| Motor Application | General Purpose |
| Box Width | 5 7/16 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Media Mapping Output | G |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Box Length | 6 3/8 in |
| Rated Efficiency | 86% |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Frame Size | 140TC, 180C |
| Output Shaft | Solid |
| Input Motor HP | 1.50 |
| Output Bore Shaft Dia. | 1.125 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Box Height | 6 15/16 in |
| Family Name | F |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Fan Cooled | No |
| Worm Position | Universal |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Ratio | 25:1 |
| Output Torque | 1199 lb-in |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Output Configuration | Left Output |
| Series | 700 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Media Mapping Style | F |
| Output RPM @ Input RPM | 70 rpm @ 1750 rpm |
| Input Power Rating | 1.55 hp, 1.156 kW |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Output RPM @ 1750 rpm Input | 70 rpm |
| Motor Frame Size | B7140TC180C |
| Torque Out @ 1750 rpm | 1199 in lb |
| Bolt Center | 5 in x 2 7/8 in |
| Output Torque @ RPM | 1150 in lb @ 1150 rpm, 1199 in lb @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Center Distance | 2.375 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711496091 |
