Find a Service Center
Alternate Products
- Series E Radially Assembled Retaining Ring
- 0.438 in Shaft Size
- 0.035 in Thick
- Carbon Steel
- Phosphate Finish
description
- Radially assembled, external ‘E’
- Perhaps the most popular and widely used radial retaining ring is the “E” (so named because it is shaped like the letter “E”.) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.
features
- Radially installed into machined grooves on shafts (external)
- Accommodate lower thrust loadings than axial retaining rings
- Do not have lug holes: Easy to install using retaining ring applicators
- Provide protruding “shoulders” for effective retention of assemblies
- Economical alternative to Axially Assembled external tapered section rings
| Finish | Phosphate |
| Edge Margin | 0.094 in |
| Limiting Speed | 16500 rpm |
| Tape Rings Stack | 250 |
| Groove Depth | 0.047 in |
| Type | Radially Assembled |
| Thrust Ring Safety Factor of 3 Pr Lb | 842 lbf |
| Tape Length of Stack | 8.75 in |
| Length of Stack | 8.75 in |
| Shaft Dia. | 0.438 in |
| Clearance Installed in Groove | 0.71 in |
| Plating | Phosphate |
| RPM Limit | 16500 rpm |
| Outside Dia. | 0.687 in |
| Thickness | 0.035 in |
| Thrust Groove Safety Factor of 2 Pg Lb | 480 lbf |
| Inch/Metric | Inch |
| Load Capacity [Max] | 830 lbs |
| Series | E |
| Package Type | Stacked |
| Tape Width | 1.25 in |
| Material | Carbon Steel |
| Weight | 0.013 LB |
| EAN or UPC | 721717030837 |
