Find a Service Center
- 1.75 in Shaft Diameter
- 3 in Housing Bore
- 0.313 in Overall Width
- Fluorocarbon Rubber (FKM) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Seal Design | SKF Wave |
| Case Construction | Steel Case w/o Inner Case |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Temperature Range [Min] | -40 °F |
| Pressure | 10 psi |
| Operating Temperature [Max] | 390 °F |
| Installation | Housing Press Fit |
| Lip Type | Single Lip |
| Design | CRW1 |
| Operating Temperature [Min] | -5 °F |
| Bore Sealant | Bore Tite |
| Case Design | Metal Case |
| Spring Type | Garter |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Speed | 0.07 ft/min |
| Spring Material | Carbon Steel |
| Inch/Metric | Inch |
| Overall Width | 0.313 in |
| Case Material | Steel |
| Shaft Dia. | 1.75 in |
| Lip Style | Internal |
| Surface Speed [Nom] | 2,063 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Temperature Range [Max] | 400 °F |
| Construction | CRW1 |
| Housing Bore Dia. | 3 in |
| Solid | Yes |
| Weight | 0.108 LB |
| EAN or UPC | 85311018937 |
