19777

Fluoro Rubber Dual Lip Shaft Seal

Item #100914399

Auto Replenish

each One-time purchase

Alternate Products

Timken Co. 471424V

Dual Lip with One Spring

Item #100754362

each

Compare

Product Details

Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.

Specifications

Seal Application	Dirt Exclusion and Lubricant Retention
Design	CRWA1
Spring Type	Garter
Case Design	Metal Case
Seal Design	SKF Wave
Overall Width	0.313 in
Speed	0.07 ft/min
Lip Material	Fluorocarbon Rubber (FKM)
Lip Style	Internal
Construction	CRWA1
Lip Type	Dual Lip
Misalignment & Runout (In. @ Feet Per Minute)	0.015@1000, 0.010@3600
Lubricant	Oil or Grease
Pressure	10 psi
Operating Temperature [Max]	390 °F
Cover/Compensation Ring/Plate Required	No
Installation	Housing Press Fit
Temperature Range [Max]	400 °F
Temperature Range [Min]	-40 °F
Shaft Dia.	2 in
Housing Bore Dia.	2.623 in
Spring Material	Carbon Steel
Case Material	Steel
Inch/Metric	Inch
Seal Type	Oil
Case Construction	Steel Case w/o Inner Case
Solid	Yes
Operating Temperature [Min]	-5 °F
Bore Sealant	Bore Tite
Surface Speed [Nom]	3,600 ft/min
Weight	0.089 LB
EAN or UPC	85311022200