Find a Service Center
- 2 in Shaft Diameter
- 3 in Housing Bore Diameter
- 11 mm Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Installation | Housing Press Fit |
| Housing Bore Dia. | 3.751 in |
| Construction | CRWH1 |
| Design | CRWH1 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Fluorocarbon Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Case Design | Metal Case, Inner Case |
| Spring Material | Carbon Steel Garter |
| Overall Width | 0.438 in |
| Seal Application | General Purpose |
| Seal Type | Oil |
| Temperature Range [Min] | -40 °F |
| Temperature Range [Max] | 400 °F |
| Speed | 0.07 ft/min |
| Seal Design | SKF Wave |
| Solid | Yes |
| Shaft Dia. | 2.75 in |
| Lip Style | Internal |
| Operating Temperature [Max] | 390 °F |
| Lubricant | Oil or Grease |
| Pressure | 10 psi |
| Lip Type | Single Lip |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Inch/Metric | Inch |
| Weight | 0.328 LB |
| EAN or UPC | 85311028424 |
