Find a Service Center
- 3 in Shaft Diameter
- 3.75 in Housing Bore Diameter
- 0.63 in Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- High pumping rate
- With garter spring
- Accommodate misalignment
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Seal Application | Dirt Exclusion |
| Installation | Housing Press Fit |
| Housing Bore Dia. | 3.75 in, 95.28 mm |
| Lip Style | Internal |
| Overall Width | 0.63 in, 15.95 mm |
| Temperature Range [Max] | 400 °F |
| Lubricant | Oil or Grease |
| Surface Speed [Nom] | 3,600 ft/min |
| Operating Temperature [Max] | 390 °F |
| Construction | HMSA25 |
| Temperature Range [Min] | -40 °F |
| Lip Type | Triple Lip w/One Spring |
| Shaft Dia. | 3 in, 76.2 mm |
| Pressure | 10 psi |
| Case Construction | Steel Case w/o Inner Case |
| Design | HMSA25 |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Material | Fluoro Rubber (FKM) |
| Operating Temperature [Min] | -5 °F |
| Inch/Metric | Metric |
| Seal Design | Assembled Design |
| Weight | 0.216 LB |
| EAN or UPC | 85311154734 |
