Find a Service Center
- 5 in Shaft Diameter
- 6 in Housing Bore Diameter
- 12 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Shaft Dia. | 5 in |
| Lip Style | Internal |
| Case Construction | Steel Case w/Inner Case |
| Temperature Range [Min] | -40 °F |
| Inch/Metric | Inch |
| Lubricant | Oil or Grease |
| Seal Application | General Purpose |
| Construction | CRWH1 |
| Spring Material | Carbon Steel Garter |
| Lip Material | Nitrile Rubber (NBR) |
| Operating Temperature [Max] | 210 °F |
| Design | CRWH1 |
| Installation | Housing Press Fit |
| Cover/Compensation Ring/Plate Required | No |
| Solid | Yes |
| Overall Width | 0.5 in |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Pressure | 10 psi |
| Seal Type | Oil |
| Case Design | Metal Case, Inner Case |
| Seal Design | SKF Wave |
| Housing Bore Dia. | 6.001 in |
| Weight | 0.589 LB |
| EAN or UPC | 85311037273 |
