Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Bore Dia. | 1 1/2 in |
| Flange Length | 1 1/2 in |
| RPM [Max] | 3600 rpm |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Set Screw Location | Oneover K Sand 90° |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Flange Diameter | 8.625 in |
| Hub Dia. | 5 1/4 in |
| Material | High Strength Cast Iron |
| Bore Type | Finished with Keyway |
| Set Screw Size | 3/8-16 UNC |
| O.D. | 8 5/8 in |
| Compatible Bore Size [Max] | 3 7/8 in |
| Size | 11 |
| Hub Type | Shaft Hub |
| Hub Length | 1 1/8 in |
| Keyseat | 3/8 in x 3/16 in |
| Compatible Bore Size [Min] | 1/2 in |
| Length Through Bore | 3 7/16 in |
| Weight | 23.0 LB |
| EAN or UPC | 698672028011 |
