Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| RPM [Max] | 2800 rpm |
| Material | High Strength Cast Iron |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Flange Length | 43 mm |
| Bore Type | Finished with Keyway |
| O.D. | 255 mm |
| Hub Type | Shaft Hub |
| Hub Dia. | 146 mm |
| Length Through Bore | 102 mm |
| Bore Dia. | 70 mm |
| Bore Size Tolerance | +.030 to +.060 mm |
| Compatible Bore Size [Max] | 3 15/16 in, 100 mm |
| Keyseat | 20 mm x 4.9 mm |
| Set Screw Size | M12x1.75 |
| Compatible Bore Size [Min] | 7/8 in, 23 mm |
| Set Screw Location | Oneover K Sand 90° |
| Hub Length | 40 mm |
| Size | 12 |
| Flange Diameter | 10 in |
| Weight | 31.8 LB |
| EAN or UPC | 698672154550 |
