Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Bore Type | Finished with Keyway |
| Compatible Bore Size [Min] | 7/8 in, 23 mm |
| Hub Type | Shaft Hub |
| Size | 12 |
| Set Screw Size | M12x1.75 |
| Flange Diameter | 10 in |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Compatible Bore Size [Max] | 3 15/16 in, 100 mm |
| RPM [Max] | 2800 rpm |
| O.D. | 255 mm |
| Hub Length | 40 mm |
| Length Through Bore | 102 mm |
| Bore Dia. | 80 mm |
| Material | High Strength Cast Iron |
| Hub Dia. | 146 mm |
| Bore Size Tolerance | +.030 to +.060 mm |
| Flange Length | 43 mm |
| Keyseat | 22 mm x 5.4 mm |
| Set Screw Location | Oneover K Sand 90° |
| Weight | 31.8 LB |
| EAN or UPC | 698672154567 |
