Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
applications
- Applications In Motors, Pumps, Compressors, Blowers, Mixers and Conveyors
| Keyseat | 3/16 in x 3/32 in |
| Flange Diameter | 2.062 in |
| Hub Length | 13/32 in |
| Material | Sintered Carbon Steel |
| Flange Length | 25/64 in |
| Bore Dia. | 5/8 in |
| Length Through Bore | 51/64 in |
| Hub Dia. | 1 1/2 in |
| Bore Type | Finished with Keyway |
| Compatible Bore Size [Min] | 3/8 in |
| Set Screw Location | Oneover K Sand 90° |
| O.D. | 2 1/16 in |
| Set Screw Size | 1/4-20 UNC |
| RPM [Max] | 9200 rpm |
| Compatible Bore Size [Max] | 7/8 in |
| Bore Size Tolerance | +.0005 to +.0015 in |
| Size | 3 |
| Hub Type | Shaft Hub |
| Angular Misalignment [Max] | 1° |
| Weight | 0.3 LB |
| EAN or UPC | 698672620031 |
