Find a Service Center
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Hub Type | Shaft Hub |
| Hub Dia. | 98 mm |
| Set Screw Size | M10x1.5 |
| Size | 9 |
| Bore Type | Finished with Keyway |
| Material | High Strength Cast Iron |
| Bore Dia. | 30 mm |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Length Through Bore | 61 mm |
| Compatible Bore Size [Max] | 2 7/8 in, 73 mm |
| Set Screw Location | Oneover K Sand 90° |
| RPM [Max] | 3750 rpm |
| Hub Length | 20 mm |
| O.D. | 161 mm |
| Compatible Bore Size [Min] | 7/16 in, 12 mm |
| Flange Length | 26 mm |
| Keyseat | 8 mm x 3.3 mm |
| Bore Size Tolerance | +.020 to +.041 mm |
| Flange Diameter | 6.35 in |
| Weight | 8.7 LB |
| EAN or UPC | 698672645515 |
