Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Hub Length | 20 mm |
| Flange Length | 26 mm |
| Bore Type | Finished with Keyway |
| Bore Size Tolerance | +.025 to +.050 mm |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Compatible Bore Size [Max] | 2 7/8 in, 73 mm |
| Size | 9 |
| Compatible Bore Size [Min] | 7/16 in, 12 mm |
| O.D. | 161 mm |
| Bore Dia. | 45 mm |
| Set Screw Size | M10x1.5 |
| Flange Diameter | 6.35 in |
| Keyseat | 14 mm x 3.8 mm |
| Set Screw Location | Oneover K Sand 90° |
| Hub Dia. | 98 mm |
| Material | High Strength Cast Iron |
| Hub Type | Shaft Hub |
| Length Through Bore | 61 mm |
| RPM [Max] | 3750 rpm |
| Weight | 8.0 LB |
| EAN or UPC | 698672027885 |
