Find a Service Center
Alternate Products
description
- Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools. This part is the flange only
- spacer hubs and sleeve inserts listed seperately.
| Flange Diameter | 6.35 in |
| Length Through Bore | 61 mm |
| Bore Dia. | 48 mm |
| Angular Misalignment [Max] | 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves |
| Hub Length | 20 mm |
| Hub Dia. | 98 mm |
| Bore Size Tolerance | +.025 to +.050 mm |
| Compatible Bore Size [Min] | 7/16 in, 12 mm |
| Material | High Strength Cast Iron |
| Hub Type | Shaft Hub |
| Set Screw Size | M10x1.5 |
| Compatible Bore Size [Max] | 2 7/8 in, 73 mm |
| RPM [Max] | 3750 rpm |
| Bore Type | Finished with Keyway |
| Flange Length | 26 mm |
| Size | 9 |
| Keyseat | 14 mm x 3.8 mm |
| Set Screw Location | Oneover K Sand 90° |
| O.D. | 161 mm |
| Weight | 7.7 LB |
| EAN or UPC | 698672645553 |
