Find a Service CenterOring
category
- O-Rings 16,575
- Face Seals 1,510
- Lubrication Equipment 1,344
- Fluids & Oils 306
- Hydraulic Pumps 102
- Hydraulic Seals 76
- Pneumatic Connectors & Accessories 34
- Process Pumps 32
- Shaft Seal Kits - Seal & Gasket 10
- Wear Sleeves 10
- Bearing Tools 10
- Filters,Regulators & Lubricators 9
- Pump Seals 6
- Instrumentation 6
- Hose Reels 5
- Air Compressors & Accessories 4
- Cartridge Valves & Accessories 4
- Automotive Tools 4
- Batteries 4
- Greases 2
- Hydraulic Connectors 2
- AC Motors & Accessories 2
- Pillow Blocks 2
- Shaft Seals 2
- Pneumatic Cylinders 2
- Wipers 2
- Flow Controls & Pressure Regulators 1
- Keystock 1
- Retaining Rings 1
- Bearing Inserts 1
- Hydraulic Hose 1
- Lubricants & Compounds 1
- Carts & Trucks 1
- Hydraulic Filters 1
- Accessories 1
- Plumbing Equipment 1
- Hand Tools 1
- Power Tools 1
- Dryers, Separators & Drains 1
Pending Obsolete
Alemite
3036
-
mac
3036 | Flush Type Fitting
Item #100874320
- Drive Thread
- Straight
- 3/8" Overall Length
- 5/16" Shank Length
- 3/16" Drill Diameter
Pending Obsolete
Alemite
1966-B
-
mac
1966-B | Non-Corrosive Fitting
Item #100874302
- Straight
- 1/4"-29 Taper
- Material-Monel
- 17/32" OAL
- 3/16" Shank Length
Pending Obsolete
Alemite
1814
-
mac
PENDING RECODE TO ALEM_LAGN-1814, MTRL - 120957098
Item #100874286
- Drive Oiler Fitting
Superseded
Alemite
3009
-
mac
3009 | Drive Fitting
Item #100874315
- For 3/16" Drill
- Straight
- No Ball Check
- 25/64" OAL
- 3/32" Shank Length
Pending Obsolete
Oring
.156NEOPRENE CORD | O-Ring Cord
Item #102206372
- Neoprene O-Ring Cord
- 0.156 in Cross Section
- 70A Durometer
- Sold by the Foot
Pending Obsolete
Oring
07 344
-
mac
07 344 | Individual O-Rings
Item #102232137
- 3 7/8" ID
- 4 1/4" OD
- 3/16" Cross Section Diameter
- E.P.R.
- 70 Durometer
Oring
5.7X469.3MM
-
mac
5.7X469.3MM | Individual Metric O-Rings
Item #102203537
- 469.3000 mm ID
- 480.700 mm OD
- 5.700 mm Cross Section Diameter
- Nitrile Buna N
- 70 Durometer
Alemite
50500
-
mac
50500 | Pressure Relief Fitting
Item #100874661
- Relief Pressure(psi) Min. 400, Max 650
- OAL 1/2"
- Shank Length 19/64"
- Hex Size 7/16"
Pending Obsolete
Oring
07 340
-
mac
07 340 | Individual O-Rings
Item #102208736
- 3 3/8" ID
- 3 3/4" OD
- 3/16" Cross Section Diameter
- E.P.R.
- 70 Durometer
Alemite
3054-B
-
mac
3054-B | Thread Forming Fitting
Item #100874326
- 1/4"-28 Special Taper Thread
- 90° Angle
- 3/4" OAL
- 3/8" Hex
Pending Obsolete
Alemite
3053-B
-
mac
3053-B | Thread Forming Fitting
Item #100874325
- 1/4"-28 Thread
- 45° Angle
- 3/8" Hex Size
- .230 - .235 Recommended Hole Size
Pending Obsolete
Oring
02 364
-
mac
02 364 | Individual O-Rings
Item #102206320
- 6 3/4" ID
- 7 1/8" OD
- 3/16" Cross Section Diameter
- Nitrile Buna N
- 90 Durometer
Product Availability by Store Location
Close
