Skip to content Skip to navigation menu
TIGEAR-2 Right Angle Worm Gear Reducer

30Q50R14

TIGEAR-2 Right Angle Worm Gear Reducer
Item #101915981
  • 3 in Center Distance
  • 140TC Frame Size
  • Cast Iron Housing Material
  • Right Output
TIGEAR-2 Right Angle Worm Gear Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3 in Center Distance
  • 140TC Frame Size
  • Cast Iron Housing Material
  • Right Output

features

  • Totally enclosed, ventless sealing system
  • Factory filled synthetic lubricant
  • HNBR seal material provides better wear and temperature range
  • Increased gear precision and accuracy
  • Seal journals held to exacting tolerances
  • Higher torque capacity
  • Greater efficiency
  • Cooler operating temperatures
  • Left, right or hollow output shafts

compliances

  • 0

options

  • Base kits
  • Tie rods
  • Output brackets
Frame Size 140TC
Thermal Horsepower Rating 2.34 hp
Housing Material Cast Iron
Shaft Length Output 3.2 in
Bolt Pattern 7 x 4
Box Length 8.24 in
Suitable For Washdown No
Output Style Right
Mounting Bolt Pattern Width 4 in
Lubrication PAG, Standard Temperature
Output Configuration Right Output
Input HP @ RPM 1.75 hp @ 1750 rpm
Motor Application General Purpose
Output (Shaft or Bore) Size 1 3/8 in
Output Shaft Right (Solid B)
HP @ RPM 1.5 hp @ 1800 rpm
Base to Output Center Height 3.25 in
Horsepower Output 1.25 hp
Input Style Quill
Horsepower Input 1.75 hp
Frame 140TC
Box Height 8.88 in
Center to End of Shaft 6.75 in
Output Shaft Diameter 1.375 in
Torque Out @ 1750 rpm 2257 in lb
Output RPM @ 1750 rpm Input 35 rpm
Mounting Bolt Pattern Length 7 in
Motor Compatibility NEMA Motor
Nominal Ratio 50
Center Distance 3 in
Overhung Load 2300 lbf
Rated Torque Output 2257 lbf
Seal Type Single-Lip Contact
Component Type Gearbox
Input (Shaft or Bore) Size 7/8 in
Output Torque @ RPM 2257 in lb @ 1750 rpm
Bolt Centers w/ Vertical "J" Base Kit (in) 11.88 x 4
Output RPM @ Input RPM 35 rpm @ 1750 rpm
Box Width 6.67 in
Bolt Centers w/ Std. Base Kit (in) 8.44 x 5.88
Ratio 50:1
Input Configuration C-Face Quilled
Paint Type Standard
Weight 89.0 LB
EAN or UPC 782475461561
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison