Skip to content Skip to navigation menu
Cast Iron Housing Ball Bearing 2 Bolts Pillow Block

P2BDLB111

Cast Iron Housing Ball Bearing 2 Bolts Pillow Block
Item #100939597
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material
Cast Iron Housing Ball Bearing 2 Bolts Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material

applications

  • Air handling
  • Unit handling
  • Food
  • Forest products
  • Paper

features

  • Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
  • DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced protection against contaminants
  • Patented Maxlife cage is made from a high temperature polymer material, and its one-of-a-kind, compartmentalized design ensures that grease pockets are maintained around the balls, leading to less likelihood for grease washout and cooler operating tempera
  • Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
  • Rugged housing has solid feet drilled for dowel pins to simplify installation alignment
  • D-LOK collar locks bearing to shaft concentrically, without marring or burning and provides a 360° clamping force for less vibration
Suitable for High Temperature No
Bearing Design Non-Expansion
Bolt Diameter 0.5 in
Base to Center Height 2.06 in
Bolt Holes 2
Ball Bearing Series 209 Series
Bolt Hole Length 7/8 in
Locking Device Concentric Clamp Collar
Base Length 7 1/2 in
No. of Bolts 2
Bolt Hole Spacing 5 3/4 in
Series P2BDLB
End Type Open End
Shaft Attachment Clamp Collar
Bore Length 2.01 in
Housing Construction Solid
Speed [Max] 5000 rpm
Greasable Yes
Base Height 5/8 in
Take-Up Frame Size LD-20, TS-250
Dynamic Load Capacity 7891 lbf
Grease Name Unirex N2
Shaft Dia. 1.6875 in
Bolt to Bolt [Min] 5.5 in
Standoff Housing No
Length Through Bore 2 in
Mounted Unit Duty Normal-Duty
Base Width 2 1/8 in
Insert Material Steel
Housing Material Cast Iron
Static Load Capacity 4906 lbf
Expansion Capability Fixed
Bearing Type Ball Bearing
Seal Type Contact Seals
Sensor Ready Adapter Required
Bolt Hole Spacing Range [Max] 6 1/16 in
Suitable For Washdown No
Inch/Metric Inch Bore
Pillow Block Type Thru-Bolt
Misalignment Range ±2°
Housing Height 4 3/16 in
Bolt to Bolt [Max] 6.19 in
Lubrication Grease
Weight 6.48 LB
EAN or UPC 782475892297
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison