Skip to content Skip to navigation menu
Cast Iron Housing Ball Bearing 2 Bolts Pillow Block

P2BSC014

Cast Iron Housing Ball Bearing 2 Bolts Pillow Block
Item #100733442
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material
Cast Iron Housing Ball Bearing 2 Bolts Pillow Block
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 2 Bolts
  • Cast Iron Housing Material
  • Solid Housing Construction
  • Steel Insert Material

applications

  • Air handling
  • Unit handling
  • Food and beverage
  • Forest products
  • Paper
  • Automotive
  • Chemical
  • Packaging and processing

features

  • Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
  • DualGuard sealing system includes a mechanically retained, land riding, single lip contact seal plus a patented rubberized flinger for enhanced protection against contaminants
  • Ball cage is made of heat stabilized nylon with fiberglass reinforcement, which allows higher operating temperatures and greater flexibility with added strength
  • Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
  • 65° setscrew spacing offers an optimum balance between locking force and inner ring stress
  • Grade 10 balls for quieter operation and less vibration
Housing Height 2 25/32 in
Insert Material Steel
Sensor Ready Adapter Required
Base Width 1 13/32 in
Housing Material Cast Iron
Base Length 5 1/2 in
Bearing Design Non-Expansion
Housing Construction Solid
No. of Bolts 2
Bolt Hole Spacing 4 3/8 in
Locking Device Setscrew Locking Inner Ring
Bolt to Bolt [Max] 4.5 in
Length Through Bore 1.1875 in
Mounted Unit Duty Normal-Duty
Insert Type Steel Insert
Base Height 19/32 in
Seal Type Contact Seals
Speed [Max] 4500 rpm
Suitable for High Temperature No
Bolt Hole Length 27/32 in
Inch/Metric Inch Bore
Shaft Dia. 0.875 in
Suitable For Washdown No
Bolt Hole Spacing Range [Max] 4 1/2 in
Standoff Housing No
Bearing Type Ball Bearing
Series P2BSC
Base to Center Height 1.44 in
Bolt Hole Spacing Range [Min] 4 1/4 in
Greasable Yes
Lubrication Grease
Take-Up Frame Size LD-10, TS-100
Static Load Capacity 1769 lbf
Grease Name Unirex N2
Bolt Diameter 0.375 in
Bolt Holes 2
Bolt to Bolt [Min] 3.69 in
Dynamic Load Capacity 3146 lbf
Bearing Insert INSSC014
Misalignment Range ±2°
Pillow Block Type Thru-Bolt
Shaft Attachment Setscrew
Bore Length 1.34 in
Outer Ring Size 205
End Type Open End
Ball Bearing Series 205 Series
Expansion Capability Fixed
Weight 1.66 LB
EAN or UPC 782475113828
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison