Find a Service Center
Boston Gear
732-50F-H
700 Series 50:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870823
- 2 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Material | Cast Iron, Standard Paint |
| Center Distance Code | 732 |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Frame | N/A |
| Box Length | 9 in |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Output Torque Rating Range [Max] | 3499 lb-in, 399 Nm |
| Frame Size | Shaft Input, Not a C-Face |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Style | Right Angle |
| Output Shaft Projection | Solid Double Projecting Output |
| Input Power Rating | 2.12 hp, 1.581 kW |
| Worm Position | Universal |
| Torque Out @ 1750 rpm | 2791 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Output Shaft | Solid |
| Series | 700 |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Family Name | Std Unit |
| Box Height | 9 3/8 in |
| Output Torque | 2791 lb-in |
| Center Distance | 3.25 in |
| Input Motor HP | 2 |
| Shaft Assembly Code | H |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 1.375 in |
| Input Configuration | Shaft Input |
| Bolt Center | 9 1/2 in x 6 1/8 in |
| Motor Application | General Purpose |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Torque Out @ 1150 rpm | 2850 in lb |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Box Width | 5 7/8 in |
| Output Speed | 35 rpm |
| Reduction Type | Single |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 73% |
| Media Mapping Output | H |
| HP @ RPM | 2 hp @ 1800 rpm |
| Input (Shaft or Bore) Size | 7/8 in |
| Output Configuration | Left & Right Output |
| Washdown Duty | No |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Use With | 732 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4.69 in |
| Output Torque Rating Range [Min] | 2500 lb-in, 310 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Input HP @ RPM | 1.41 hp @ 1150 rpm, 2.12 hp @ 1750 rpm |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Output Torque @ RPM | 2791 in lb @ 1750 rpm, 2850 in lb @ 1150 rpm |
| Housing Material | Cast Iron |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Ratio | 50:1 |
| Lubrication | None |
| Fan Cooled | Yes |
| Weight | 66.1 LB |
| EAN or UPC | 781711534083 |
