Find a Service Center
Boston Gear
F7718-15-B5-H
700 Series 15:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #100848244
- 1 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Output Shaft | Solid |
| Input Configuration | C-Face Quilled |
| Reduction Type | Single |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | F |
| Output Torque | 552 lb-in |
| Box Height | 5 3/4 in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Series | 700 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Length | 5 1/2 in |
| Material | Cast Iron, Standard Paint |
| Base Mounting Attachment | No Base |
| Output Speed | 116.7 rpm |
| Lubrication | None |
| Torque Out @ 1150 rpm | 472 in lb |
| Torque Out @ 1750 rpm | 552 in lb |
| Media Mapping Output | H |
| Output Bore Shaft Dia. | 0.875 in |
| Base | No |
| Shaft Assembly Code | H |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Style | Right Angle |
| Bore Code | B5 |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Frame | 56C |
| Output Torque @ RPM | 472 in lb @ 1150 rpm, 552 in lb @ 1750 rpm |
| Motor Frame Size | B556C |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Use With | 718 |
| Output Shaft Projection | Solid Double Projecting Output |
| Washdown Duty | No |
| Center Distance Code | 718 |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Ratio | 15:1 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Standard | AGMA Service Class I |
| Input Power Rating | 1.13 hp, 0.843 kW |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Thrust Load @ RPM | 500 lb/in @ 1150 rpm, 500 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Motor HP | 1 hp |
| Frame Size | 56C |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Media Mapping Style | F |
| Housing Material | Cast Iron |
| Output Configuration | Left & Right Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Worm Position | Universal |
| Output (Shaft or Bore) Size | 7/8 in |
| Input HP @ RPM | 0.67 hp @ 1150 rpm, 1.13 hp @ 1750 rpm |
| Keyway Size | 3/16 x 3/32 |
| Center Distance | 1.75 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Rated Efficiency | 90% |
| Box Width | 5 1/32 in |
| HP @ RPM | 0.75 hp @ 1800 rpm |
| Motor Application | General Purpose |
| Input Motor HP | 1 |
| Weight | 19.1 LB |
| EAN or UPC | 781711519318 |
