Find a Service Center
Boston Gear
F7718-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101833606
- 0.5 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque @ RPM | 609 in lb @ 1750 rpm, 525 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Washdown Duty | No |
| Style | Right Angle |
| Frame | 56C |
| Shaft Assembly Code | G |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Base Mounting Attachment | No Base |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Fan Cooled | No |
| Base | No |
| Motor Frame Size | B556C |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Torque Out @ 1150 rpm | 525 in lb |
| Rated Efficiency | 74% |
| Output Speed | 43.8 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Family Name | F |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Box Length | 5 1/2 in |
| Media Mapping Output | G |
| Box Height | 5 3/4 in |
| Lubrication | None |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Input Motor HP | 0.50 |
| Use With | 718 |
| Output Shaft | Solid |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Material | Cast Iron, Standard Paint |
| Max. Input HP @ 100 rpm | 0.052 hp |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Series | 700 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Output Shaft Projection | Solid Left Output |
| Media Mapping Style | F |
| Ratio | 40:1 |
| HP @ RPM | 0.3333333 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Box Width | 5 1/32 in |
| Output Bore Shaft Dia. | 0.875 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Reduction Type | Single |
| Input Power Rating | 0.57 hp, 0.425 kW |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Center Distance Code | 718 |
| Center Distance | 1.75 in |
| Worm Position | Universal |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Motor Application | General Purpose |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Output (Shaft or Bore) Size | 7/8 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Input Configuration | C-Face Quilled |
| Frame Size | 56C |
| Output Torque | 609 lb-in |
| Torque Out @ 1750 rpm | 609 in lb |
| Bore Code | B5 |
| Output Configuration | Left Output |
| Input HP @ RPM | 0.57 hp @ 1750 rpm, 0.33 hp @ 1150 rpm |
| Motor HP | 0.3333 hp |
| Weight | 19.1 LB |
| EAN or UPC | 781711519424 |
