Boston Gear
F7721-10-B5-G
700 Series 10:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101734239
- 2 Input Motor hp
- 700 Series
- 2.06 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Should not be used in place of standard angular contact spindle bearings.
| Reduction Type | Single |
| Motor Application | General Purpose |
| Rated Efficiency | 94% |
| Center Distance Code | 721 |
| HP @ RPM | 2 hp @ 1800 rpm |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Motor Frame Size | B556C |
| Output Bore Shaft Dia. | 1 in |
| Output Shaft | Solid |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.88 in |
| Frame | 56C |
| Lubrication | None |
| Base | No |
| Series | 700 |
| Bolt Centers w/ Std. Base Kit (in) | 6 3/8 x 4 11/16 |
| Box Length | 6 in |
| Output (Shaft or Bore) Size | 1 in |
| Box Height | 6 3/8 in |
| Media Mapping Style | F |
| Worm Position | Universal |
| Shaft Assembly Code | G |
| Use With | 721 |
| Max. Overhung Load @ 1750 rpm | 700 lb/in |
| Torque Out @ 1150 rpm | 725 in lb |
| Fan Cooled | No |
| Bore Code | B5 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.94 in |
| Output Shaft Projection | Solid Left Output |
| Standard | AGMA Service Class I |
| Input HP @ RPM | 1.49 hp @ 1150 rpm, 2.34 hp @ 1750 rpm |
| Frame Size | 56C |
| Max. Input HP @ 100 rpm | 0.19 hp |
| Input Configuration | C-Face Quilled |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Input (Shaft or Bore) Size | 5/8 in |
| Center Distance | 2.0625 in |
| Base to Centerline of Input Shaft | 4 11/32 in |
| Motor HP | 1 hp |
| Output Torque Rating Range [Max] | 999 lb-in, 109 Nm |
| Media Mapping Output | G |
| Output Torque @ RPM | 725 in lb @ 1150 rpm, 789 in lb @ 1750 rpm |
| Box Width | 5 3/16 in |
| Max. Thrust Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Housing Material | Cast Iron |
| Family Name | F |
| Base to Shaft Center Height w/Std. Base Kit | 4.81 in |
| Base Mounting Attachment | No Base |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Input Motor HP | 2 |
| Torque Out @ 1750 rpm | 789 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical Base Kits (in) | 8 3/8 x 4 7/8 |
| Input Power Rating | 2.34 hp, 1.745 kW |
| Style | Right Angle |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Max. Thrust Load @ 1150 rpm | 700 lb/in |
| Output Speed | 175 rpm |
| Output Torque Rating Range [Min] | 750 lb-in, 85 Nm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 8.63 x 2.63 |
| Ratio | 10:1 |
| Bolt Center | 5 in x 2 7/8 in |
| Base to Centerline of Output Shaft | 2.28 in |
| Max. Overhung Load @ RPM | 700 lb/in @ 1150 rpm, 700 lb/in @ 1750 rpm |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.13 in |
| Output Torque | 789 lb-in |
| Weight | 24.1 LB |
| EAN or UPC | 781711519547 |
