Skip to content Skip to navigation menu
700 Series C-Face Quilled Reducer

F732-50F-B5-G

700 Series C-Face Quilled Reducer
Item #101872208
  • 3 1/4" Center Distance
  • 50:1 Ratio
  • 56C Frame
  • w/Fan
  • C-Face Quilled Input
  • Left Output
  • Universal Worm Position
  • No Lubricant
  • Cast Iron
+ Show More + Show Less
700 Series C-Face Quilled Reducer
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 3 1/4" Center Distance
  • 50:1 Ratio
  • 56C Frame
  • w/Fan
  • C-Face Quilled Input

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Must be filled to the proper level with the recommended lubricant for your application before operation
Output Torque @ RPM 2791 in lb @ 1750 rpm, 2850 in lb @ 1150 rpm
Shaft Assembly Code G
Ratio 50:1
Worm Position Universal
Use With 732
Max. Overhung Load @ RPM 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm
Max. Overhung Load @ 1750 rpm 1300 lb/in
Bolt Centers w/ Vertical Base Kits (in) 11 7/8 x 6 1/8
Input (Shaft or Bore) Size 5/8 in
Base to Centerline of Input Shaft 6 3/4 in
Box Length 9 in
Family Name F
Output RPM @ 1750 rpm Input 35 rpm
Installed Options Fan
Max. Thrust Load @ RPM 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm
Frame Size 56C
Housing Material Cast Iron
Washdown Duty No
Lubrication None
Base to Shaft Center Height w/Low Vert. Base Kit 4 11/16 in
Output (Shaft or Bore) Size 1 3/8 in
Bore Code B5
Base to Shaft Center Height w/Std. Base Kit 6 3/4 in
Fan Cooled Yes
Max. Input HP @ 100 rpm 0.19 hp
Box Width 7 9/16 in
Base to Centerline of Output Shaft 3 1/2 in
HP @ RPM 2 hp @ 1800 rpm
Thermal Input Horsepower @ 1750 RPM N/A
Motor Application General Purpose
Input Configuration C-Face Quilled
Box Height 9 3/8 in
Output RPM @ Input RPM 35 rpm @ 1750 rpm
Bolt Centers w/ Std. Base Kit (in) 9 1/2 x 6 1/8
Max. Thrust Load @ 1150 rpm 1100 lb/in
Center Distance 3.25 in
Input HP @ RPM 1.41 hp @ 1150 rpm, 2.12 hp @ 1750 rpm
Base to Shaft Center Height w/High Vert. Base Kit 6 1/4 in
Torque Out @ 1150 rpm 2850 in lb
Output Configuration Left Output
Reduction Type Single Reduction
Torque Out @ 1750 rpm 2791 in lb
Bolt Center 7 1/2 in x 4 in
Frame 56C
Weight 66.1 LB
EAN or UPC 781711533635
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison