Skip to content Skip to navigation menu


FWA721-200-B5-G

700 Series C-Face Quilled Double Reduction Parallel Reducer

Item #102149098
each
    Shipment Options

Product details

  • 2 1/16" Center Distance
  • 200:1 Ratio
  • 56C Frame
  • C-Face Quilled Input
  • Left Output

features

  • Large oil reservoir provides efficient heat dissipation and lubrication for longer life
  • Housing is straddle milled top and bottom for precise alignment
  • Internal baffles ensure positive, leak-free venting
  • Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
  • Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
  • High strength steel output shaft ensures capacity for high torque
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • Super finished oil seal diameters on both input and output shafts extend seal life

caution

  • Not recommended for use in air brake systems where temperatures exceed 200 °F or where battery acid can drip on tubing.

Specifications

Input Configuration C-Face Quilled
Bolt Centers w/ Vertical Base Kits (in) 8 3/8 x 4 7/8
Box Height 6 25/64 in
Base to Centerline of Input Shaft 3 3/8 in
Output (Shaft or Bore) Size 1 in
Bolt Centers w/ Vertical "J" Base Kit (in) 8.63 x 2.63
Base to Shaft Center Height w/Low Vert. Base Kit 3.13 in
Base to Shaft Center Height w/Vert. "J" Base Kit 3.94 in
HP @ RPM 0.25 hp @ 1800 rpm
Reduction Type Double Reduction
Motor HP 1/4 hp
Bore Code B5
Thermal Input Horsepower @ 1750 RPM N/A
Bolt Centers w/ Std. Base Kit (in) 6 3/8 x 4 11/16
Worm Position Universal¦Parallel
Output Configuration Left Output
Motor Application General Purpose
Max. Thrust Load @ 1150 rpm 700 lb/in
Base to Shaft Center Height w/Std. Base Kit 4.81 in
Base to Shaft Center Height w/High Vert. Base Kit 4.88 in
Box Length 5 13/64 in
Family Name FWA
Torque Out @ 1750 rpm 990 in lb
Center Distance 2 1/16 in
Lubrication None
Shaft Assembly Code G
Base to Centerline of Output Shaft 4 3/32 in
Frame 56C
Washdown Duty No
Housing Material Cast Iron
Input (Shaft or Bore) Size 5/8 in
Ratio 200:1
Output RPM @ 1750 rpm Input 8.75 rpm
Fan Cooled No
Box Width 9 55/64 in
Max. Overhung Load @ 1750 rpm 700 lb/in
Frame Size 56C
Keyway Size 3/16 x 3/32
Torque Out @ 1150 rpm N/A
Bolt Center 5 in x 2 7/8 in
Weight 35.1 LB
EAN or UPC 781711523407
Close Compare List Open Compare List Toggle

Product Comparison