Find a Service Center
Boston Gear
RF724-30-B5-H
700 Series 30:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101872194
- 1 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1150 rpm | 1170 in lb |
| Frame | 56C |
| Input Configuration | C-Face Coupled |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Motor HP | 1 hp |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Input Power Rating | 1.33 hp, 0.992 kW |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Output Bore Shaft Dia. | 1.125 in |
| Input HP @ RPM | 0.89 hp @ 1150 rpm, 1.33 hp @ 1750 rpm |
| Media Mapping Style | RF |
| Bore Code | B5 |
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Torque Out @ 1750 rpm | 1200 in lb |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Style | Right Angle |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Material | Cast Iron, Standard Paint |
| Input Motor HP | 1 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Keyway Size | 3/16 x 3/32 |
| Use With | 724 |
| Output Speed | 58.3 rpm |
| Family Name | RF |
| Rated Efficiency | 83% |
| Output Torque @ RPM | 1170 in lb @ 1150 rpm, 1200 in lb @ 1750 rpm |
| Output Configuration | Left & Right Output |
| Center Distance | 2.375 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Box Length | 6 3/8 in |
| Motor Frame Size | B556C |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Center | 5 in x 2 7/8 in |
| Media Mapping Output | H |
| Frame Size | 56C |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Housing Material | Cast Iron |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.12 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Shaft Assembly Code | H |
| Ratio | 30:1 |
| Washdown Duty | No |
| Center Distance Code | 724 |
| Worm Position | Universal |
| Base Mounting Attachment | No Base |
| Output Shaft | Solid |
| Fan Cooled | No |
| Standard | AGMA Service Class II |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Box Width | 5 7/16 in |
| Reduction Type | Single |
| Box Height | 6 15/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Output Torque | 1200 lb-in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Lubrication | None |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Weight | 41.1 LB |
| EAN or UPC | 781711527382 |
