Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 40 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Bore Size [Min] | 0.5 in |
| Teeth Face Width | 1.25 in |
| Bore Size [Max] | 2 in |
| Belt Pitch | 3/8 in |
| Pitch Diameter | 4.775 in |
| Outside Dia. | 4.745 in |
| Bushing Bore Size [Max] | 2 in |
| Belt Width | 1 in |
| Bore Range [Min] | 0.5 in |
| Hub Type | A |
| Bore Range [Max] | 2 in |
| Width Across Teeth | 1.063 in |
| Bore Size [Min] | 0.5 in |
| Material External Use | Steel |
| Material Internal Use | Carbon Steel |
| Finished Bore | N/A |
| Bushing Type | Taper-Lock |
| Material | Steel |
| Belt Size | L |
| Type | KF-1 |
| Bore Type | Bushed |
| Flange O.D. | 4.997 in |
| Pitch Dia. | 4.775 in |
| Length Through Bore | 1.25 in |
| Bushing Series | 2012 |
| No. of Teeth | 40 |
| Construction Internal | Solid |
| Weight | 3.8 LB |
| EAN or UPC | 697950083902 |
