H45WXBBL53A

description

• Parker's H series four-way. valves conform to the ISO 5599-1 standard, which specifies an ISO mounting pattern interface to a common subbase or manifold. This permits changing valves easily without disturbing any piping. Electrical connections are quickly made with 30 mm DIN connectors. The H series is available in ISO sizes 1, 2 and 3, with size 1 being the smallest. All H series valves feature Parker's exclusive Wear Compensation System (WCS) for millions of trouble-free cycles. These H series valves are ideal for controlling double-acting cylinders, air motors and rotary actuators from a single location on a machine. Order subbases and manifold bases separately. 40 micron filtration recommended.

features

• 30 mm DIN connection
• Factory prelubricated for nonlube service
• ISO 5599-1 30 mm DIN electrical connection (22 mm DIN available)
• Two position – single or double air pilot
• Three position – all ports blocked, center exhaust and pressure center available
• Flush, nonlocking override, lighted
• Electric solenoid operator type
• H series are interchangeable with Parker's F series valves
• Maximum Performance – low friction, fast response, lower operating pressures and less wear
• Long Cycle Life – under pressure, radial expansion of the seal occurs to maintain sealing contact with the value bore
• NonLube Service – no lubrication required for continuous valve shifting
• Bi-Directional Spool Seals – common spool used for any pressure, including vacuum