Find a Service Center
Alternate Products
- Steel Material
features
- Bevel and Miter Gears Develop Axial Thrust
- Adequate Bearing support Must be Provided
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears. Spiral Bevel and Miter gears must be run in sets of mating gears with opposite hand spiral.
- Browning Gears are rated in accordance with AGMA standards
| Hub Diameter (in) | 1.75 |
| Bore Type | Minimum Plain Bore |
| Pitch Diameter (in) | 4.5 |
| Length Through Bore (in) | 1.0625 |
| Face Width (in) | 0.6 |
| Number of Teeth/Threads | 54 |
| Bore Size (in) | 0.625 |
| Bushing Bore Size (in) | 0.6250 to 1.0000 |
| Material | Steel |
| Mounting Distance | 1.75 |
| Hub Projection (in) | 0.75 |
| Hub Type | Type B |
| Bore (Max) (in) | 1 |
| Diametral Pitch | 12 |
| Gear Construction | Plain |
| Bore (Min) (in) | 0.625 |
| Pressure Angle | 20 |
| Weight | 1.84 LB |
| EAN or UPC | 662289114818 |
