Find a Service Center
- Radial Shaft Seal
- 34 mm Shaft Diameter
- 55 mm Housing Bore Diameter
- 9 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lip Style | Internal |
| Shaft Dia. | 34 mm |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 55 mm |
| Construction | HMSA7 |
| Inch/Metric | Metric |
| Temperature Range [Max] | 250 °F |
| Seal Application | Light Dirt Exclusion |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lip Type | Dual Lip w/One Spring |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | Standard |
| Seal Type | Grease |
| Pressure | 10 psi |
| Spring Material | Carbon Steel Garter |
| Overall Width | 9 mm |
| Case Construction | Rubber Covered Steel Case |
| Weight | 0.097 LB |
| EAN or UPC | 85311237963 |
