Find a Service Center
- Radial Shaft Seal
- 9 mm Shaft Diameter
- 26 mm Housing Bore Diameter
- 7 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Lip Material | Nitrile Rubber (NBR) |
| Shaft Dia. | 9 mm |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 26 mm |
| Seal Type | Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Seal Design | Standard |
| Construction | HMS4 |
| Lip Type | Single Lip w/Spring |
| Case Construction | Rubber Covered Steel Case |
| Inch/Metric | Metric |
| Overall Width | 7 mm |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Surface Speed [Nom] | 3,600 ft/min |
| Temperature Range [Max] | 250 °F |
| Spring Material | Carbon Steel Garter |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.066 LB |
| EAN or UPC | 85311002653 |
