Find a Service Center
- 1.9375" Shaft, 3.5" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- The Fafnir double rigid pillow block, type DRNR, is designed to provide a sturdy two-bearing mounting for fans and blowers, bench grinders, buffers, vertical shafts, and similar heavy-duty applications. The compact, one-piece housing is equipped with two Fafnir wide inner ring bearings with integral, R-seals and self-locking collar. Individual grease chambers are provided for each bearing. Close-clearance baffles allow excess grease to work into the spacious center chamber of the housing. Grease fittings installed in place of the standard pipe plugs will provide means of relubrication. Type DRNR pillow blocks can be mounted in any position with ample radial and thrust capacity ensured at all times.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Height | 5 5/16 in |
| Bolt Holes | 2 |
| Collar O.D. | 2 3/4 in |
| Bolt Hole Spacing | 9 1/2 in |
| Pillow Block Type | Thru-Bolt |
| Overall Width | 13 7/8 in |
| Housing Construction | 1 Piece |
| Base Length | 12 in |
| Bearing Design | Non-Expansion |
| Length Through Bore | 13.875 in |
| Housing Width | 4 7/8 in |
| Bearing Type | Ball Bearing |
| Insert Type | Steel Insert |
| Housing Material | Cast Iron |
| Bearing Insert | 1115KR |
| Base Height | 1 1/8 in |
| Series | DRNR Series |
| Bolt Hole Width | 11/16 in |
| End Type | Open End |
| Mounted Unit Duty | Normal-Duty |
| Base Width | 7 in |
| Lubrication | Relubricatable |
| Inch/Metric | Inch Bore |
| Bolt Hole Length | 1 1/8 in |
| Shaft Dia. | 1.9375 in |
| Bolt Size | 5/8 in |
| Locking Device | Eccentric Locking Collar |
| Seal Type | Contact Seals |
| Weight | 37.034 LB |
| EAN or UPC | 87796060463 |
