Find a Service Center
- 0.5 in Shaft Diameter
- 0.875 in Housing Bore
- 0.25 in Overall Width
- Carboxylated Nitrile (XNBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Material | Steel |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 0.5 in |
| Spring Material | Carbon Steel |
| Seal Design | SKF Wave |
| Temperature Range [Max] | 250 °F |
| Inch/Metric | Inch |
| Overall Width | 0.25 in |
| Seal Type | Oil |
| Solid | Yes |
| Lip Type | Single Lip |
| Construction | CRW1 |
| Spring Type | Garter |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Lubricant | Oil or Grease |
| Temperature Range [Min] | -40 °F |
| Lip Style | Internal |
| Lip Material | Carboxylated Nitrile (XNBR) |
| Case Construction | Steel Case w/o Inner Case |
| Case Design | Metal Case |
| Seal Application | General Purpose |
| Speed | 0.07 ft/min |
| Bore Sealant | Bore Tite |
| Housing Bore Dia. | 0.875 in |
| Design | CRW1 |
| Cover/Compensation Ring/Plate Required | No |
| Installation | Housing Press Fit |
| Operating Temperature [Min] | -40 °F |
| Weight | 0.062 LB |
| EAN or UPC | 85311156165 |
