Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Low-speed spool
- Speed sensors
- Nine shaft options
- Five mounting styles
| Paint | Primer Low Gloss Black |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Flow Rate | 45 lpm |
| Displacement (in³/rev) | 2.8 |
| Special Features | None |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| Displacement | 46 cm3/Rev |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Seal Material | Buna-N |
| Torque | 73 Nm |
| Pilot Diameter | 1.75 in |
| RPM [Min] | 969 rpm |
| Splines | 0 |
| Bolt Circle Dia. | 3 1/4 in |
| Port Type | Manifold, O-Ring |
| Port Code | C |
| Port Location | Side Port |
| Mounting Type Code | B |
| Motor Type | Spool Valve |
| Special Features Hardware Code | 00 |
| RPM [Max] | 969 rpm |
| Flow [Max] | 12 gal/min |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | None |
| Rotation | Standard Rotation |
| Corrosion Resistant | No |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Holes | 3/8-16 |
| Intermittent Pressure [Max] | 165 bar |
| Pressure [Max] | 1800 psi |
| Case Drain Code | 0 |
| Paint Code | A |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Series | H Series |
| Weight | 11.05 LB |
