Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- Manifold, O-Ring Port
- 4 Bolt Mount
- Straight Output Shaft
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Nine shaft options
- Five mounting styles
- Low-speed spool
- Speed sensors
| Flange Orientation | Standard |
| Shaft Type | Straight w/ Woodruff Key |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Series | H Series |
| Pilot Diameter | 1.75 in |
| Corrosion Resistant | No |
| RPM [Max] | 152 rpm |
| Case Drain | None |
| Motor Type | Spool Valve |
| Mounting Holes | 3/8-16 |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Special Features | None |
| Paint Code | A |
| Motor Element | Gerotor |
| Intermittent Pressure [Max] | 103 bar |
| Mounting Type Code | B |
| Port Location | Side Port |
| Port Type | Manifold, O-Ring |
| Seal Material | Buna-N |
| RPM [Min] | 152 rpm |
| Output Shaft Code | 01 |
| Special Features Assembly Code | 0 |
| Flow Rate | 57 lpm |
| Bolt Circle Dia. | 3 1/4 in |
| Pressure [Max] | 1250 psi |
| Output Torque at Rated PSI (inch/pounds) | 3602.25 in lb |
| Torque | 407 Nm |
| Duty | Standard-Duty |
| Mount Type | 4 Bolt |
| Port Code | C |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain Code | 0 |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Displacement | 370 cm3/Rev |
| Paint | Primer Low Gloss Black |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| Displacement (in³/rev) | 22.6 |
| Weight | 14.7 LB |
