Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.54 in |
| Special Features Hardware Code | 00 |
| Corrosion Resistant | No |
| Pilot Diameter | 3.25 in |
| Mount Type | 2 Bolt |
| Paint | Primer Low Gloss Black |
| RPM [Max] | 969 rpm |
| Port Type | SAE O-Ring |
| RPM [Min] | 969 rpm |
| Port Size | 7/8-14 |
| Inlet Pressure [Max] | 2500 psi |
| Pressure [Max] | 1800 psi |
| Port Location | Side Port |
| Output Torque at Rated PSI (inch/pounds) | 646.1 in lb |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| Output Shaft Code | 08 |
| Shaft Size & Type | Straight |
| Shaft Type | Straight w/ Cross Hole |
| Duty | Standard-Duty |
| Special Features | None |
| Material | Cast Iron |
| Port Code | A |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Torque | 73 Nm |
| Paint Code | A |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Displacement (in³/rev) | 2.8 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Flow [Max] | 12 gal/min |
| Series | H Series |
| Intermittent Pressure [Max] | 165 bar |
| Mounting Holes | 0.535 in |
| Flow Rate | 45 lpm |
| Seal Material | Buna-N |
| Case Drain | None |
| Displacement | 46 cm3/Rev |
| Port Size & Location | SAE-10 Side |
| Weight | 11.2 LB |
