Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 3/4-16 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Displacement | 0.000008710947 cm3/Rev |
| Port Code | G |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Maximum Speed @ Continuous Flow | 304 rpm @ 15 gal/min |
| Paint | Primer Low Gloss Black |
| Series | H Series |
| Special Features | None |
| Mounting Type Code | B |
| Shaft Type | Tapered w/ Woodruff Key |
| Case Drain Code | 0 |
| Displacement (in³/rev) | 11.3 |
| Special Features Hardware Code | 00 |
| Duty | Standard-Duty |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Paint Code | A |
| RPM [Max] | 304 rpm |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Pressure [Max] | 1600 psi |
| Port Size | 3/4-16 |
| Flow [Max] | 15 gal/min |
| Port Location | End Port |
| Port Type | SAE O-Ring |
| Pilot Diameter | 1.75 in |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Min] | 304 rpm |
| Flow Rate | 57.97 lpm |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Material | Cast Iron |
| Torque | 265 Nm |
| Splines | 0 |
| Corrosion Resistant | No |
| Bolt Circle Dia. | 3 1/4 in |
| Shaft Size | 1 |
| Viscocity (SUS) [Max] | 100 |
| Flange Orientation | Standard |
| Output Shaft Code | 18 |
| Mount Type | 4 Bolt |
| Shaft Size & Type | Tapered |
| Case Drain | None |
| Output Torque at Rated PSI (inch/pounds) | 2345.45 in lb |
| Weight | 13.0 LB |
