Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- G 1/2 Prort Size
- BSP Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- SAE ports
- Splined and tapered shafts
| Flow Rate | 57 lpm |
| Torque | 192 Nm |
| Paint | Primer Low Gloss Black |
| Displacement | 120 cm3/Rev |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Output Shaft Code | 24 |
| Bolt Circle Dia. | 4.19 in |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Mount Type | 2 Bolt |
| Shaft Size & Type | Straight |
| Splines | 0 |
| Rotation | Standard Rotation |
| Flow [Max] | 15 gal/min |
| Shaft Type | Straight |
| Flange Orientation | Standard |
| Intermittent Pressure [Max] | 165 bar |
| Case Drain | G 1/4 (BSP) |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Corrosion Resistant | No |
| Series | H Series |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| Inlet Pressure [Max] | 2500 psi |
| Port Size | G 1/2 |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Material | Cast Iron |
| Pressure [Max] | 1800 psi |
| RPM [Min] | 469 rpm |
| RPM [Max] | 469 rpm |
| Paint Code | A |
| Mounting Type Code | A |
| Port Code | E |
| Case Drain Code | 2 |
| Special Features Hardware Code | 00 |
| Port Type | BSP |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 7.3 |
| Mounting Hole Size | 0.54 in |
| Special Features | None |
| Motor Type | Spool Valve |
| Weight | 13.0 LB |
