These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Mechanical Options
None
Surge Suppressor/Damper
None
Spool Code
2
Rated Flow [Max]
21 gal/min
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
N
Function
3-Position Detented
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Housing Code
W
AC/DC
AC
Coil Rating Code
B
Port T Code
6
Overrides
No Overrides
Operation
Solenoid Operated
Port Restrictor Plugs
None
Spool Shift Timing
N/A
Electrical Connection
No Connector
Pilot/Drain
None
Actuator Type
Solenoid
Manual Override Option Code
None
Solenoid
Double
Pilot Valve Type
N/A
Port T Pressure Rating
3000 psi
EN Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Valve Type
High-Performance
Electrical Options
None
Electrical Connector Code
None
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Reducer Module
N/A
Function Code
2
Coil Type Code
F
Voltage & Frequency
110/120 VAC – 50/60 Hz
Indicator Lights
No
Solenoid Energization Code
None
Seal Material
Buna-N
Pressure Port Check Valve Pressure
N/A
Design No.
60
Center Position
All Ports Blocked
Crossover
All Ports Blocked
Response Type
Standard Response
Solenoid Code
B
Weight
1.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
