It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
When a drive has three pulleys, at least two should be flanged
If the drive has more than three pulleys, every other pulley should be flanged
Belt Pitch
5 mm
No. of Teeth
112
Pitch Diameter
7.018 in
Bore Range [Max]
2 in
Bore Type
QD Bushed
Belt Width
15 mm
Finished Bore
N/A
Sprocket Width
N/A
Bushing Type
QD
Type
C1
Outside Dia.
6.973 in
Bore Range [Min]
0.5 in
Bushing Series
SDS
Pitch Dia.
7.018 in
Weight
5.9 LB
EAN or UPC
782475743384
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
