RC-162110-FS

Single Row Steel Needle Roller Bearing

Item #101742861

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Overall Width	0.63 in, 15.88 mm
Radial Internal Clearance	N/A
Series	RC
Oil Hole	w/o Oil Hole
Origin	Roller Clutches
Clamp Torque	412 lbf
Bearing Material	1014 Steel
O.D. Type	Straight
Capacity	Standard Capacity
End Type	Open End
Outer Ring Width	0.63 in, 15.88 mm
Precision Class	ABEC 1
Shaft Dia. [Min]	0.9995 in
No. of Rows	Single
Cage Material	Polymer
Relubrication Feature	No
Precision Ground	Yes
Relubricatable	No
O.D.	1.31 in, 33.35 mm
Enclosure	Open
Rolling Element	Roller
Tolerance	Iso Class 0 (RBEC 1)
Mounting Method	Press Fit
Shaft Dia. [Max]	1 in
I.D.	1 in, 25.41 mm
Self Aligning	No
Lubricant	Rust Preventative
Bore Type	Round
Operating Temperature [Max]	230 ˚F
Housing Bore [Min]	1.312 in
Housing Shoulder Diameter	1.9 in
Cage Type	Window
Speed (Max) Oil	8700 rpm
Housing Bore [Max]	1.313 in
Component	Assembly
Bearing Design	Roller Clutch
Radial Internal Clearance Specification	N/A
Operating Temperature [Min]	-22 ˚F
Weight	0.007 LB
EAN or UPC	605790193101