Find a Service Center
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 17 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | B |
| Bushing Bore Size [Max] | 1.125 in |
| Bore Size [Max] | 1.125 in |
| Flange O.D. | 2.256 in |
| Hub Dia. | 1.437 in |
| Material Internal Use | Atomized Metals |
| Hardened Teeth | Without Hardened Teeth |
| Outside Dia. | 1.999 in |
| Bore Type | Rough Bore |
| Finished Bore | N/A |
| Material External Use | Steel |
| Pitch Diameter | 2.029 in |
| Belt Size | L |
| Bore Size [Min] | 0.5 in |
| Bushing Type | None |
| No. of Teeth | 17 |
| Pitch Dia. | 2.029 in |
| Material | Steel |
| Belt Pitch | 3/8 in |
| Bore Range [Max] | 1.125 in |
| Construction Internal | Solid |
| Hub Projection | 5/8 in |
| Type | DF-1 |
| Length Through Bore | 1.875 in |
| Teeth Face Width | 1.25 in |
| Bore Range [Min] | 0.5 in |
| Belt Width | 1 in |
| Bushing Series | N/A |
| Bushing Bore Size [Min] | 0.5 in |
| Weight | 1.0 LB |
| EAN or UPC | 697950151045 |
