Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 22 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Teeth Face Width | 0.75 in |
| Hardened Teeth | Without Hardened Teeth |
| Type | DF-1 |
| Finished Bore | N/A |
| Hub Type | B |
| Material Internal Use | Atomized Metals |
| Material | Steel |
| Bushing Bore Size [Min] | 0.5 in |
| Bore Range [Max] | 1.5 in |
| Bushing Bore Size [Max] | 1.5 in |
| Bore Range [Min] | 0.5 in |
| Hub Dia. | 2 in |
| No. of Teeth | 22 |
| Pitch Diameter | 2.626 in |
| Bushing Type | None |
| Belt Pitch | 3/8 in |
| Pitch Dia. | 2.626 in |
| Outside Dia. | 2.596 in |
| Belt Width | 0.5 in |
| Length Through Bore | 1.5 in |
| Material External Use | Steel |
| Bore Size [Max] | 1.5 in |
| Hub Projection | 3/4 in |
| Bushing Series | N/A |
| Bore Type | Rough Bore |
| Construction Internal | Solid |
| Belt Size | L |
| Bore Size [Min] | 0.5 in |
| Weight | 1.1 LB |
| EAN or UPC | 697950151441 |
