Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 26 Tooth
- 3/4 in
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Type | DF-1 |
| Bore Range [Min] | 0.75 in |
| Bore Size [Min] | 0.75 in |
| Construction Internal | Solid |
| Bushing Type | None |
| Bore Range [Max] | 2.5 in |
| Hub Dia. | 3 1/2 in |
| Bushing Bore Size [Min] | 0.75 in |
| Belt Width | 1 in |
| Bushing Series | N/A |
| Teeth Face Width | 1.313 in |
| Hub Projection | 1 1/8 in |
| Flange O.D. | 4.369 in |
| Material Internal Use | Carbon Steel |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| Length Through Bore | 2.437 in |
| No. of Teeth | 26 |
| Bore Type | Rough Bore |
| Hardened Teeth | With Hardened Teeth |
| Bore Size [Max] | 2.5 in |
| Pitch Diameter | 4.138 in |
| Bushing Bore Size [Max] | 2.5 in |
| Material External Use | Steel |
| Material | Steel |
| Pitch Dia. | 4.138 in |
| Outside Dia. | 4.086 in |
| Belt Size | H |
| Hub Type | B |
| Weight | 6.7 LB |
| EAN or UPC | 697950151632 |
