Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 30 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Size [Min] | 0.5 in |
| Belt Width | 0.5 in |
| Teeth Face Width | 0.75 in |
| No. of Teeth | 30 |
| Bushing Type | None |
| Bore Size [Max] | 1.625 in |
| Material External Use | Steel |
| Bushing Bore Size [Max] | 1.625 in |
| Outside Dia. | 3.595 in |
| Material Internal Use | Atomized Metals |
| Hub Dia. | 2 7/8 in |
| Hub Projection | 3/4 in |
| Finished Bore | N/A |
| Length Through Bore | 1.5 in |
| Belt Size | L |
| Construction Internal | Solid |
| Bore Range [Max] | 1.625 in |
| Type | DF-1 |
| Bushing Bore Size [Min] | 0.5 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Type | B |
| Bushing Series | N/A |
| Material | Steel |
| Bore Type | Rough Bore |
| Flange O.D. | 3.805 in |
| Pitch Diameter | 3.581 in |
| Bore Range [Min] | 0.5 in |
| Pitch Dia. | 3.581 in |
| Belt Pitch | 3/8 in |
| Weight | 2.7 LB |
| EAN or UPC | 697950151915 |
