Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 48 Tooth
- 3 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Type | A |
| Material External Use | Cast Iron |
| Hardened Teeth | With Hardened Teeth |
| Pitch Diameter | 7.639 in |
| Length Through Bore | 3.375 in |
| Bore Size [Max] | 2.938 in |
| Type | JF-2 |
| Bore Range [Min] | 0.5 in |
| Bushing Bore Size [Max] | 2.938 in |
| Material Internal Use | Cast Iron |
| Belt Pitch | 1/2 in |
| Finished Bore | N/A |
| Material | Cast Iron |
| Bushing Bore Size [Min] | 0.5 in |
| Construction Internal | Solid |
| Pitch Dia. | 7.639 in |
| Bushing Series | SF |
| No. of Teeth | 48 |
| Bore Type | Bushed |
| Teeth Face Width | 3.375 in |
| Flange O.D. | 7.867 in |
| Belt Size | H |
| Bushing Type | QD |
| Bore Range [Max] | 2.9375 in |
| Belt Width | 3 in |
| Bore Size [Min] | 0.5 in |
| Outside Dia. | 7.588 in |
| Weight | 16.6 LB |
| EAN or UPC | 697950152318 |
