Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 22 Tooth
- 1 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 1.063 in |
| Type | KF-1 |
| Outside Dia. | 2.596 in |
| No. of Teeth | 22 |
| Teeth Face Width | 1.25 in |
| Bore Type | Bushed |
| Bushing Series | 1008 |
| Bore Range [Min] | 0.5 in |
| Material External Use | Steel |
| Belt Pitch | 3/8 in |
| Bushing Bore Size [Max] | 1 in |
| Length Through Bore | 0.875 in |
| Material | Steel |
| Material Internal Use | Carbon Steel |
| Construction Internal | Solid |
| Belt Width | 1 in |
| Finished Bore | N/A |
| Bushing Type | Taper-Lock |
| Bore Size [Min] | 0.5 in |
| Pitch Dia. | 2.626 in |
| Hub Projection | 3/8 in |
| Pitch Diameter | 2.626 in |
| Belt Size | L |
| Bore Size [Max] | 1 in |
| Bore Range [Max] | 1 in |
| Flange O.D. | 2.852 in |
| Bushing Bore Size [Min] | 0.5 in |
| Hub Type | A |
| Weight | 1.3 LB |
| EAN or UPC | 697950083360 |
