Find a Service Center
Alternate Products
- Timing Belt Pulley
- 1/2 in Belt Pitch
- H Belt Size
- 48 Tooth
- 2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Construction Internal | Solid |
| Bore Type | Bushed |
| Outside Dia. | 7.585 in |
| Pitch Dia. | 7.639 in |
| Flange O.D. | 7.867 in |
| Type | KF-1 |
| Bore Size [Min] | 0.938 in |
| No. of Teeth | 48 |
| Belt Width | 2 in |
| Bore Size [Max] | 3 in |
| Bore Range [Min] | 0.875 in |
| Bore Range [Max] | 3 in |
| Width Across Teeth | 2.094 in |
| Belt Size | H |
| Hub Type | A |
| Belt Pitch | 1/2 in |
| Material Internal Use | Cast Iron |
| Bushing Type | Taper-Lock |
| Material External Use | Cast Iron |
| Length Through Bore | 2 in |
| Bushing Bore Size [Max] | 3 in |
| Bushing Bore Size [Min] | 0.938 in |
| Finished Bore | N/A |
| Bushing Series | 3020 |
| Teeth Face Width | 2.344 in |
| Material | Cast Iron |
| Pitch Diameter | 7.639 in |
| Weight | 14.3 LB |
| EAN or UPC | 697950083957 |
