Find a Service Center
Alternate Products
- Timing Belt Pulley
- 3/8 in Belt Pitch
- L Belt Size
- 48 Tooth
- 1/2 in Belt Width
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Constant speed
- Nonslip
- Minimum backlash
- High modulus strength member
- Freedom from initial belt tension
- Compact design
- Lightweight
- No lubrication required
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 2012 |
| Bushing Bore Size [Min] | 0.5 in |
| Width Across Teeth | 0.563 in |
| Finished Bore | N/A |
| Construction Internal | Solid |
| Bore Type | Bushed |
| Bore Size [Min] | 0.5 in |
| Belt Width | 0.5 in |
| Bushing Type | Taper-Lock |
| Belt Size | L |
| Teeth Face Width | 0.75 in |
| Hub Type | B |
| Material External Use | Cast Iron |
| Hub Projection | 1/2 in |
| Pitch Diameter | 5.73 in |
| Pitch Dia. | 5.73 in |
| Material Internal Use | Cast Iron |
| Bushing Bore Size [Max] | 2 in |
| Outside Dia. | 5.7 in |
| No. of Teeth | 48 |
| Bore Range [Max] | 2 in |
| Hub Dia. | 3.938 in |
| Flange O.D. | 5.95 in |
| Bore Range [Min] | 0.5 in |
| Material | Cast Iron |
| Type | CF-1 |
| Belt Pitch | 3/8 in |
| Length Through Bore | 1.25 in |
| Bore Size [Max] | 2 in |
| Weight | 4.88 LB |
| EAN or UPC | 697950083971 |
